Sony ICP-X7000 Installation Manual page 77

(2) The setting window opens.
(3) Select modules shown on the right side and shift them to left rows.
MAC addresses of registerable modules (panel rows and extension boxes in this case) are shown on
the right side.
t
. When an MAC address on the right is selected, the corresponding panel blinks.
. Modules can be shifted by drag and drop operation or by using the central buttons [<] and [>] with
modules selected.
(4) After the setting has been completed, click [Apply].
After [Apply] is clicked, the setting is applied. It takes about 30 seconds to apply the setting because
devices are rebooted at this time.
n
Be sure to exit the Unit Config window by clicking [Apply] or [Cancel]. If page reloading is per-
formed or the browser is directly closed, the setting may become unstable.
ICP-X7000
1-69 (E)