Sony ICP-X7000 Installation Manual page 88

NTP server access permission setting
The following describes how to permit accesses to the NTP server when the switcher control station
(PWS-100SC1/PWS-110SC1) functions as an NTP server.
Procedure
1. Open the Maintenance menu.
2. Click [Network Setting] on the left side of the Maintenance Menu window.
The Network Setting window appears.
3. Select the [Enable] radio button of "NTP Access for AUX Remote."
4. Click the [Apply] button.
The access permission setting is stored.
1-80 (E)
ICP-X7000