Lan - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-3666.
These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal
network and cannot be seen on the Internet.
Click the drop-down menu to select IP address
Get IP From
setting mode.
y Static IP (Manual): Select this setting to assign a
static IP address to the device.
y Dynamic IP (DHCP): Select this setting to obtain
an IP address from a DHCP server on the network.
Enter the IP address to assign a static IP address
IP Address
Enter the subnet mask. All devices in the
Subnet Mask
network must share the same subnet mask.
Enter the IP address of the gateway/router in
Default Gateway
your network.
Enter a DNS server IP address. This is usually the
DNS
local IP address of your gateway/router.
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

LAN

28