Download Print this page
D-Link Nuclias Connect AC1200 Quick Installation Manual

D-Link Nuclias Connect AC1200 Quick Installation Manual

Wave 2 outdoor access point
Hide thumbs Also See for Nuclias Connect AC1200:


Quick Links

Quick Installation Guide
Nuclias Connect AC1200 Wave 2 Outdoor Access Point
Additional documentation is also available on the D-Link website



Summary of Contents for D-Link Nuclias Connect AC1200

  • Page 1 Quick Installation Guide Nuclias Connect AC1200 Wave 2 Outdoor Access Point DAP-3666 LAN2 LAN1(PoE) Additional documentation is also available on the D-Link website...
  • Page 3: Package Contents

    - Stainless mount screw (hexagonal hole) x1 LAN2 LAN1(PoE) If any of the above items are damaged or missing, please contact your local D-Link reseller. Note: To power the unit, use an 802.3af or 802.3at PoE Switch or PoE Injector. Figure 2: Bottom Connectors...
  • Page 4: Installation

    The DAP-3666 is designed to be managed through Nuclias Connect. Refer to the Nuclias Connect Manual for detailed configuration instructions. Note: D-Link recommends manually configuring the device before mounting it. Nuclias Connect App Configuration Download the free Nuclias Connect app...
  • Page 5 Mounting on a Pole Manage the access point from a computer. Enter dap3666.local in the address field of your browser. Log in to the administration user interface. The default login information is Username: admin Password: admin Connecting Wirelessly Connect the management computer to the default SSID of the DAP-3666, “dlink”.
  • Page 6 Mounting on a Solid Wall Securing the Mount Screw and Connecting the Grounding Wire Figure 9: Attaching the Mount Screw Use the included mount screw (hexagonal hole) to lock the DAP-3666 to the pole/ Figure 7: Attaching the Mounting Plate wall mount.
  • Page 7 Tighten the grounding wire (green-and- yellow, 18AWG) to the DAP-3666 until it is securely attached. Figure 11: Attaching the Grounding Wire A grounding wire is to protect your device from lightning strikes and the buildup of static electricity. Attach the grounding wire to the DAP-3666 using the included screw(M3.9 * 7.8 mm).
  • Page 8 Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed.
  • Page 9 警告使用者: 此為甲類的資訊技術設備,在居住環境中使用時,可能會造成射頻擾動,在這種情況下, 使用者會被要求採取某些適當的對策。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http:// or The D-Link Limited Lifetime Warranty information is available at 1. Instructions for the installation of that conductor to building earth by a SKILLED PERSON.
  • Page 10 Industry Canada statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’...
  • Page 11: Déclaration D'industrie Canada

    Déclaration d’Industrie Canada Cet appareil est conforme aux RSS exempts de licence de l’ISDE. L’opération est soumise aux deux conditions suivantes : 1) Ce dispositif ne risque pas de produire des interférences nuisibles, et 2) il doit accepter tous types d’interférences reçues, y compris celles qui peuvent entraîner un dysfonctionnement. •...
  • Page 12 Notes...
  • Page 13 Notes...
  • Page 14 Notes...
  • Page 16 Ver. 2.01(WW)_130x183 2021/09/09 5300-00008150-01W...

This manual is also suitable for: