Wireless Resource - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect better wireless
connections in your environment.
Click the drop-down menu to enable or disable
Airtime Fairness
the airtime fairness function.
Click the drop-down menu to enable the Band
Bandsteering
Steering function. When the wireless clients
support both 2.4GHz and 5GHz and the 2.4GHz
signal is not strong enough, the device will use
5GHz as the higher priority.
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to enable or disable
Connection Limit
the connection limit function. This determines
whether to limit the number of users accessing
this device, effective for load balancing. The
exact number is entered in the User Limit
field below. This feature allows users to share
their wireless network traffic and clients using
multiple APs. If this function is enabled and
when the number of users exceeds this value,
or the network utilization of this AP exceeds
the percentage that has been specified, the
DAP-3666 will not allow clients to associate with
the AP.
This function is only available when Connection
User Limit (1 - 64)
Limit is Enabled. Set the maximum amount of
users that are allowed access (1 - 64 users) to the
device using the specified wireless band.
Click the drop-down menu to disable or enable
11n Preferred
the 11n Preferred function. The wireless clients
with 802.11n protocol will have higher priority
to connect to the device. The function is only
available when Connection Limit is Enabled.
D-Link DAP-3666 User Manual

Wireless Resource

32