D-Link NUCLIAS CONNECT DAP-3666 User Manual page 26

Web User Interface
Click the drop-down menu to enable the
802.11k
802.11k function.
Click the drop-down menu to enable the
802.11v
802.11v function.
Click the drop-down menu to enable the
802.11r
802.11r function.
Enter a name for the mobility domain. The function is
Mobility Domain
only available when 802.11r is set to Enable.
Enter a encryption key to access the wireless
Encryption Key
network. The function is only available when 802.11r
is set to Enable.
Click the radio button to disable or enable the
Over the DS
function. The function is only available when
802.11r is set toEnable.
When Authentication setting is set to WPA-
WPA Mode
Enterprise, click the drop-down menu to select
one of the following: Auto (WPA or WPA2),
WPA2 Only, or WPA Only.
Auto (WPA or WPA2) allows the device to select
either setting to match the client configuration.
Click the drop-down menu to select the cipher
Cipher Type
type for the WPA setting, type: Auto, AES, or
TKIP.
Enter the interval period in seconds in which the
Group Key Update
interval period is valid.
Interval
Enter the IP address of the RADIUS server to be
RADIUS Server
used to authenticate.
Enter the RADIUS port.
Radius Port
Enter the shared secret to be used between the
RADIUS Secret
radius server and the DAP to authenticate.
Click the drop-down menu to enable or disable
Accounting Mode
the accounting mode.
Enter the IP address of the accounting server.
Accounting Server
D-Link DAP-3666 User Manual 26