Filters; Wireless Mac Acl - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
The page allows the user to configure Wireless MAC ACL settings for access control.
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to select the access
Access Control List
control list. By default this feature is disabled.
y Select Disable to disable the filters function.
y Select Allow to accept only those devices
with MAC addresses in the Access Control
List. All other devices not on the list will be
rejected.
y Select Deny to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
Click the drop-down menu to select the SSID for
SSID Index
the specified wireless band.
Enter each MAC address that you wish to
MAC Address
include in your filter list, and click Add.
When a MAC address is entered, it is added to
MAC Address List
the following index. Highlight a listing and click
Delete to remove it from the index.
Displays information about all the current
Current Client
connected stations.
Information
To upload a ACL list file, click Choose File
Upload File
and navigate to the ACL list file saved on the
computer, and then click Upload.
To download ACL list file, click Download and to
Load ACL File to Local
save the ACL list.
Hard Drive
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

Filters

Wireless MAC ACL

71