Limit Administrator; System Name Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Check one or more of the eight main categories to display the various hidden administrator parameters and settings displayed on the next five
pages. Each of the eight main categories display various hidden administrator parameters and settings.
Check the box and the enter the specific VLAN

Limit Administrator

ID that the administrator will be allowed to log
VLAN ID
in from.
Check the box to enable the limit administrator
Limit Administrator IP
IP address.
Enter the IP address range that the
IP Range
administrator will be allowed to log in from and
then click Add.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Enter the name of the device. The default name
System Name
is D-Link DAP-3666.
Enter the physical location of the device, e.g.
Location
72nd Floor, D-Link HQ.
Enter the name of the multicast DNS. The
MDNS Name
default name is dap3666.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-3666 User Manual
Limit Administrator

System Name Settings

87