Wireless Client Mode - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Click the drop-down menu to select the wireless
Wireless Band
band, 2.4GHz or 5GHz.
Click the drop-down menu to select Wireless
Operation Mode
Client.
Enter the name of Service Set Identifier (SSID)
Network Name (SSID)
up to 32 characters and is case-sensitive.
This option is unavailable in Wireless Client
SSID Visibility
mode.
Click the drop-down menu to select the desired
Auto Channel Selection
channel. The function is only available when
Auto Channel Selection is Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
The channel used will be displayed, and
Channel
matches the AP that the DAP-3666 is connected
to when set to Wireless Client mode.
Click the drop-down menu to select 20 MHz,
Channel Width
Auto 20/40 MHz or Auto 20/40/80 MHz.
Select 20 MHz if you are not using any 802.11n
wireless clients. Auto 20/40 MHz allows you
to connect to both 802.11n and 802.11b/g or
802.11a wireless devices on your network.
Click Scan to search for available wireless
Site Survey
networks, then click on the available network
that you want to connect with.
Will be explained in the next topic. "Wireless
Authentication
Security" on page 23
Check the box to enable the Wireless MAC Clone
Enable
function.
Click the drop-down menu to select Auto or
MAC Source
Manual.
D-Link DAP-3666 User Manual

Wireless Client Mode

21