Time And Date Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
Enter the NTP server IP, choose the time zone, and enable or disable daylight savings time.
Displays the current time and date.
Current Time
Check the box to enable the AP to get the
Enable NTP
system time from an NTP server over the
Internet.
Enter the NTP server IP address.
NTP Server
Click the drop-down menu to select your
Time Zone
correct time zone.
Set the time for the AP or click Copy Your
Date And Time
Computer's Time Settings to copy the time
from the computer in use (Make sure that the
computer's time is set correctly).
Check the box to enable the daylight saving
Enable Daylight Saving
time settings.
Click the drop-down menu to select the
Daylight Saving Offset
offsetting variable in minutes to adjust for
daylight saving time.
Click the drop-down menu to designate the
Daylight Saving Dates
start/end date and time for daylight saving time.
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

Time and Date Settings

92