D-Link NUCLIAS CONNECT DAP-3666 User Manual page 35

Web User Interface
This function is only available when WMM under Performance Settings is enabled. Click the drop-down menu to enable or
WMM (Wi-Fi Multimedia)
disable the WMM function. WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio
and video applications over a Wi-Fi network.
Click the drop-down menu to enable the 802.11k function.
802.11k
Click the drop-down menu to enable the 802.11v function.
802.11v
Click the drop-down menu to enable the 802.11r function. The function is only available when Security is WPA-Personal or
802.11r
WPA-Enterprise.
Enter a name for the mobility domain. The function is only available when 802.11r is Enable.
Mobility Domain
Enter a encryption key to access the wireless network. The function is only available when 802.11r is Enable.
Encryption Key
Click the radio button to disable or enable the function. The function is only available when 802.11r is Enable.
Over the DS
This function is only available when multi-SSID is enabled and Index is an SSID other than Primary SSID. Click the radio button
Encryption
to enable or disable the encryption. If Enable is selected the following configurations are required: Key Type, Key Size, Key Index
(1~4), Network Key, and Confirm Key.
Click the drop-down menu to select HEX or ASCII.
Key Type
Click the drop-down menu to select 64 Bits or 128 Bits.
Key Size
Click the drop-down menu to select from the 1st to 4th key to be set as the active key.
Key Index (1~4)
Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.
Network Key
Re-enter the value as entered in the Network Key to confirm the setting.
Confirm Key
When Security setting is set to WPA-Personal or WPA-EAP, click the drop-down menu to select a WPA mode [Options: Auto
WPA Mode
(WPA or WPA2), WPA2 Only, or WPA1 Only]. Auto (WPA or WPA2) allows you to use both WPA and WPA2. In addition, you must
configure Cipher Type, and Group Key Update Interval.
When Security is WPA-Personal or WPA-EAP, click the drop-down menu to select Auto, AES, or TKIP.
Cipher Type
Enter the interval during which the group key will be valid.
Group Key Update
Interval
Select the means to define a unique encryption key for the defined cipher type.
Encryption key
y Manual: Select the manual option to define the PassPhrase encryption key. The minimum and maximum number of
characters is 8 to 63 ASCII characters and 64 characters in HEX. In the Confirm PassPhrase field enter the same key to confirm
the setting.
y Periodical Key Change: Select the option to have each client negotiate a very unique encryption key between the client and
the access point.
Enter the variable in hours to set the interval.
Time Interval
When Security is set to WPA-Personal, enter a pass phrase in the corresponding field.
PassPhrase
D-Link DAP-3666 User Manual 35