Pvid Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings.
Click the radio button to enable or disable VLAN
VLAN Status
status. By default this feature is disabled.
Displays the current VLAN mode.
VLAN Mode
Click the radio button to enable or disable PVID
PVID Auto Assign Status
auto assign status.
For each untagged port, set the PVID of the port
to its assigned VLAN ID. For example, if ports 1,
2, 3, 4, and 5 are untagged members of VLAN 10,
ports 1, 2, 3, 4, and 5 would be configured with
a PVID of 10.
For better system consistency, the following
configuration settings are recommended:
y set MSSID ports S1 and S2 to 16 and 17,
respectively
y set switch port trunk native VLAN 1 for trunk port
1
Click to save the updated configuration.
Save
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

PVID Settings

40