Selecting Radiography Conditions - Morita Veraview iX Operation Instructions Manual

Selecting radiography conditions

4
Incisor/Canine Premolar
Select an area (tooth) to be radiographed.
5
The exposure time (in seconds) will be shown on the display. The exposure time for the selected parameters will
automatically appear on the display.
⹅ To change the exposure time
Operation 2017-02-24
Molar
Upper Jaw
Lower Jaw
Occlusion
.
mGy cm
2
.
mGy cm
2
The exposure time can be manually adjusted by pressing
Up or Down key.
* After changing the exposure time, press and hold the
selected area (tooth) key for approximately five seconds
until you hear beeps. This saves the exposure time for the
radiography condition selected at the time.
Press the up or down key to switch the number according to the
timer table which is described later (*The value does not change
by 0.01).
Settable numbers are any of the table numbers (00 to 14).
11