Du Pont Cyrel FAST 2000TD Operation Manual page 91

Appendix A
Alarm No
Drive power failure.
007 022 WEB Waste, drive error
007 023 Motor could not move as expected.
007 024
007 025
Drive power failure.
007 026
007 027 WEB tension not reached.
007 028 Web waste roll is full.
007 029 Web nonwoven roll is near empty.
007 030 Web PET roll is near empty.
007 031 Web break detected
007 032 WEB NW, drive error -39022 Battery
low warning.
007 033 WEB PET, drive error -39022 Battery
low warning.
007 034 WEB Waste, drive error -39022
Battery low warning.
008 020 Format cylinder, drive error
008 021 Motor could not move as expected.
008 022
008 023
Drive power failure.
008 024
008 025 Format cylinder, drive error -39022
Battery low warning.
009 000 Catox. No flow sensed when required. If alarm can't be reset, please call an authorized
009 001 Catox. TCO on heater element tripped. If alarm can't be reset, please call an authorized
009 002 Catox. TCO on oxidizer tripped.
January, 2020
Description Remedy
Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
The configured web tension in job file or in idle can't
be reached. Please check settings and web
threading.
Replace full waste roll with empty roll.
Replace empty roll with new full roll.
Replace empty roll with new full roll.
When the processor has cooled down, remove
broken web and re-thread.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
Please call an authorized Service Technician.
Service Technician.
Service Technician.
If alarm can't be reset, please call an authorized
Service Technician.
Operation Manual|Cyrel FAST 2000TD
A-5