4-18
18. Position the roll according to the position
marks for 44" or 37" roll as illustrated in the
photo:
-
Position a 44" roll up against the circlip
until it touches the circlip.
-
Position a 37" roll to align with the
groove. The roll is positioned correctly
when the roll-end aligns precisely with
the groove in the air shaft.
19. Mount the air shaft with the empty roll in the
chuck bearings.
Make sure that the air shaft is positioned
correctly in both chuck bearings.
(The photo is for illustrative purpose only.)
Operation Manual|Cyrel FAST 2000TD
Maintenance
January, 2020
Need help?
Do you have a question about the Cyrel FAST 2000TD and is the answer not in the manual?