Du Pont Cyrel FAST 2000TD Operation Manual page 21

Operation procedures
• The blue 'ON/OFF' button in the home
view will flash until warm-up of both the
heated roller and catox is complete.
• The heated roller and catox sections will
be displayed in yellow while heating up.
• The blue 'ON/OFF' will stop flashing
when correct temperature is reached.
The heated roller and catox area will both
be green.
Start-up is then complete and the
processor is ready for processing.
8. Continue with description of "Preparing the
processor for plate load" on page 2-5.
January, 2020 Operation Manual|Cyrel FAST 2000TD
2-3