Du Pont Cyrel FAST 2000TD Operation Manual page 90

A-4
Alarm No
007 001 Web diameter was not detected
correctly
007 002 Web waste feed too slow
007 003 Web nonwoven feed too slow
007 004 Web PET feed too slow
007 005 Web waste feed too fast
007 006 Web nonwoven feed too fast
007 007 Web PET feed too fast
007 008 Web waste roll is full
007 009 Web nonwoven roll is near empty
007 010 Web PET roll is near empty
007 011 Web needs service, please check
before restarting process
007 012 WEB NW, drive error
007 013 Motor could not move as expected.
007 014
007 015
Drive power failure.
007 016
007 017 WEB PET, drive error
007 018 Motor could not move as expected.
007 019
007 020
007 021
Operation Manual|Cyrel FAST 2000TD
Description Remedy
Web diameter could not be detected, please check
for empty supply rolls, broken web materials and if
machine is threaded correctly.
Web waste rotation too slow, please check for
empty supply rolls, broken web materials and if
machine is threaded correctly.
Web NW rotation too slow, please check for empty
supply rolls, broken web materials and if machine is
threaded correctly.
Web PET rotation too slow, please check for empty
supply rolls, broken web materials and if machine is
threaded correctly.
Web Waste rotation too fast, please check for
empty supply rolls, broken web materials and if
machine is threaded correctly.
Web NW rotation too fast, please check for empty
supply rolls, broken web materials and if machine is
threaded correctly.
Web PET rotation too fast, please check for empty
supply rolls, broken web materials and if machine is
threaded correctly.
Web Waste roll is full, please change.
Web NW roll is empty, please change.
Web PET roll is empty, please change.
Web NW, PET or Waste roll diameter has exceeted
the alarm limits during process. Please change web
rolls before restarting the process.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Appendix A
January, 2020