Du Pont Cyrel FAST 2000TD Operation Manual page 89

Appendix A
Alarm No
003 027 Heated Roller, drive error -39022
Battery low warning.
004 000 Clamp roller 1 actuator error
004 001 Clamp roller 2 actuator error
004 002 Feed table actuator error
004 003 Plate release actuator error
004 004 Sensor bar actuator error
004 005 Strip finger actuator error
004 006 Load/eject, functional safety error
004 007 Lay down roller error
005 000 Nip engage (heated roller), drive error
005 001 Nip engage (heated roller), homing
error
005 002 Nip engage, functional safety error
005 003 Nip engage, torque is not reached
within specified process distance
005 005 Nip engage, impression depth out of
range.
005 006 Warning: Nip engage speed limited.
Drive capabilities reached.
005 020 Motor could not move as expected.
005 021
005 022
005 023
Drive power failure.
005 024
005 025 Nip engage, drive error -39022 Battery
low warning.
006 000 Heated roller heating error
006 001 Web wrap detected, please check
heated roller for PET.
007 000 Web not at standstill, possibly web
rupture
January, 2020
Description Remedy
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Load/eject system too close to another moving
element during operation, please check before
resetting machine.
Please call an authorized Service Technician.
If alarm can't be reset, please call an authorized
Service Technician.
If alarm can't be reset, please call an authorized
Service Technician.
Please call an authorized Service Technician.
NIP engage system (HR) torque could not be
reached, please check plate program.
NIP engage system (HR) impression depth could
not be reached, please check plate program.
Check the settings of the plate program.
Check for jammed plates and mechanical failures
before initializing.
If the problem persists, please call an authorized
Service Technician.
Check the safety circuit and the machine power
supply before initializing.
If the problem persists, please call an authorized
Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Please call an authorized Service Technician.
Web movement detected when not expected,
please check for broken web material.
Operation Manual|Cyrel FAST 2000TD
A-3