Du Pont Cyrel FAST 2000TD Operation Manual page 71

Maintenance
25. Lock the chuck bearings in left and right side
by pressing the chuck bearings inwards
(towards the roll).
26. Mount one long piece of the double-sided self-adhesive tape down the entire length of the new roll
(1).
NOTE: The heat resistant tape Tesa 4965 (50 mm /2") is recommended.
27. Remove the protection paper from the double-side tape.
28. Detach the end of the old material (attached to the roll above) and mount it on top of the double-sided
tape (2). Make sure that the two layers of material are parallel.
January, 2020 Operation Manual|Cyrel FAST 2000TD
4-13