Wall-Mounted Installation; Recessed Installation - CAME KIT AGT V + LITHOS Installation Manual

LVC/01

Wall-mounted installation

Use a hex key to unscrew the screws in the front plate and re-
move it (fi gure ).
Fix the plugs provided and screw in the entry panel (fi gure
at the desired height, bearing in mind the position of the video
camera lens (fi gure ).
Thread the pipe with the system conductors as shown in fi gure
.
1080 mm
94°
43,5 mm
163,5 mm
Pull out the plastic terminal cover and make the connections
(fi gure ).
Once the connections have been made, reinsert the terminal
covers.
For information on fi tting accessories, please see the "Button
modules assembly" section.
Program and adjust the entry panel as described in the "Pro-
gramming" section. Fit the front plate (fi gure

Recessed installation

First thread the pipe with the system conductors through one of
the break points (fi gure
box at the desired height, bearing in mind the position of the
video camera lens (fi gure
avoid any deformations by using the spacer provided (fi gure
point .
Use a hex key to unscrew the screws in the entry-panel front
plate and remove it (fi gure
Thread the connection cables through the hole (fi gure
500 mm
).
, point ). Then wall in the recessed
). When installing the recessed box,
).
)
,
) and