Installation - CAME AGT V Operating And Installation Manual

Installation

1
Press the small plastic tab and slide the device off the wall-mounting support to remove it.
Observe the TOP arrow.
2
Fasten the wall-mounting support to the back box.
Avoid overtightening the screws.
3
Make the connections.
4
Refi t the device to the wall-mounting support.
5
To unhook the device, use a screwdriver to press in the plastic tab and slide the device upwards.
Page 7 - Manual FA01620-EN - 08/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
①
Round back box (Ø 60 mm tube).
②
Rectangular horizontal back box 503.
③
Rectangular vertical back box 503.
④
Ophera (PHI) back box.
The box must be installed at an appropriate height for
the user.