CAME KIT AGT V + LITHOS Installation Manual page 13

M2
M1
M1
BOUT
beep beep
>3'' >3''
PROG
<6'' <6''
PROG
M2
SW3
SW3
PROG
PROG
M2
SW3
Reprogramming procedure
Entering programming mode. Press and hold the PROG key
for at least 3 s, then release it (within 6 seconds) as soon as the
PROG LED fl ashes and the button backlighting lights up as
illustrated in fi gure .
If the PROG LED does not light up, there has been a malfunction.
Check the connections and return to programming mode.
Programming the call keys. Lift the receiver handset that you
want to program (where present)
release button and AUX2 button
On the entry panel, press the call key to be associated with the
receiver . A beep will confi rm that the setting has been stored.
Reposition the handset where applicable
operations for all the other receivers.
, then press the door lock
.
and repeat the same