Advertisement
General Notes
• Read the instructions carefully before beginning the installation and carry
out the actions as specified by the manufacturer.
• The installation, programming, commissioning and maintenance of the
product must only be carried out by qualified technicians, properly trained
in compliance with the regulations in force, including health and safety
measures and the disposal of packaging.
• The installer must ensure that the information for the user, where there is
any, is provided and delivered.
• Before carrying out any cleaning or maintenance operation, disconnect the
devices from the power supply.
• The equipment must only be used for the purpose for which it was
expressly designed.
• The manufacturer declines all liability for any damage as a result of impro-
per, incorrect or unreasonable use.
eventuali danni derivanti da usi impropri, erronei ed irragionevoli.
A
This product complies with the relevant directives in force.
Decommissioning and disposal. Dispose of the packaging and the device
at the end of its life cycle responsibly, in compliance with the laws in force
in the country where the product is used. The recyclable components are
marked with a symbol and the material's ID marker.
The data and information shown in this manual are to be considered as
subject to change at any time and without the need for any advance warning.
Measurements, unless otherwise indicated, are in millimetres.
001DC02EARY
Installation
Open the unit by pressing the lever on the back A.
B
Remove the casing from the back of the unit.
a
Attach the back of the unit to a wall box using the screws provided Ba
B. The box must be installed at a suitable height for the user. Do not
over-tighten the screws.
Once connections have been completed, re-assemble the casing to the
back of the unit C.
503
C
Ø60
Advertisement
