Kessel Mono Manual page 33

2 Maintenance
2.1 Manual operation
2.2 Automatic operation
2.3 SDS self-diagnosis system
2.4 Maintenance date
2.5 Maintenance done
2.6 Maintenance interval
2.7 Calibration
3 Settings
3.1 Parameter
3.2 Profile memory
3.3 Date/Time
3.4 Type Aqualift
010-910_02
1.6.11 Sensing zone level probe
1.6.12 ON 1 - level
1.6.13 OFF 1 level
1.6.14 Alarm level
1.6.15 ON 2 - level
1.6.16 OFF 2 - level
2.1.1 Pump 1
2.1.2 Potential-free contact
2.1.3 Ext. audible alarm
2.1.4 Communication
2.1.5 Pump 2
2.3.1 SDS self-diagnosis system
2.4.1 Last maintenance
2.4.2 Next maintenance
2.6.1 Commercial 3 months
2.6.2 Commercial 6 months
2.6.3 Private 12 months
2.6.4 Manual maintenance
2.6.5 no maintenance interval
3.1.1 On delay
3.1.2 Post run time
3.1.3 Total run occur
3.1.4 Max. current
3.1.5 Min. current
3.1.6 Max. run occur
3.1.7 Max. run time
3.1.8 Air compressor offset
3.1.9 Sensor height
3.1.10 SDS self-diagnosis system
3.1.11 Sensing zone level probe
3.1.12 ON 1 - level
3.1.13 OFF 1 - level
3.1.14 Alarm level
3.1.15 ON 2 - level
3.1.16 OFF 2 - level
3.2.1 Load parameters
3.2.2 Save parameters
3.4.1 Lifting station F Compact
3.4.2 Lifting station F
3.4.3 Lifting station F XL 200 l
3.4.4 Lifting station F XL 300 l
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
On/Off
OK/Error
mm:hh - dd.mm.yy
mm 0 - 999
s 0 - 99
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
33 / 108