Kessel Mono Manual page 26

Remove nut (connector) and protective cap.
Align cable arrow on arrow and push on.
Aqualift Comfort
Tighten the connector so that the spacer ring connects
flush. If a spacer ring is not fitted, note tightening torque
of 3 Nm.
If the torque is correct, the gap between the nut and
1
hexagonal body is 3-4 mm, if a spacer ring is not fitted.
3
2
19mm
=4mm
19mm
≈ 3Nm
26 / 108 010-910_02