Installation - Kessel Mono Manual

4

Installation

4.1 Installing the control unit
Select installation position taking the following into
account:
There is a safety socket in the direct vicinity of the con-
trol unit.
The connecting cable from the wastewater pump and
float switch can be installed correctly and routed to the
control unit.
The control unit can be fastened safely and suffi-
ciently.
Unscrew housing cover.
Fit all fastening screws (drilling template included in the
scope of delivery). In doing so, ensure that the distance
(A) between the screw heads and the fastening surface is
approx. 3 to 4 mm.
If planned, feed the USB connection out of the housing,
"Further connection possibilities" .
Hang the control unit on the fastening screws and press
downwards gently. (1)
24 / 108 010-910_02