Table of Contents
Advertisement
1.
GENERAL INFORMATION
1.1 Warnings
This product has been manufactured according to rigorous technical rules of safety in conformity with EC
standards. The EC declaration may be downloaded from the Internet site (address given on the last page).
Before installing and using this product, carefully read these instructions, which contain important indi-
cations for your safety and the user's safety during the installation, commissioning and maintenance of
this product. Once the installation is terminated, keep this manual handy nearby the machine for future
consultation.
This product must be installed (installation, connections, commissioning, maintenance) and all other inter-
ventions performed by a professional applying recognized good practice procedures, and respecting the
standards and safety regulations in force. The installation must be made in accordance with the prescrip-
tions indicated in the Electromagnetic Compatibility (EMC) and Low Voltage (LV) Directives.
We advise all people exposed to risks to scrupulously respect the accident prevention standards. The ma-
nufacturer may not be held liable for any human injury and/or material damage resulting from the non-res-
pect of the safety instructions or from a change made on the product.
®
JBRB ECOWATT
PR units are intended for controlled mechanical ventilation or air recycling applications
on tertiary premises and in collective residential buildings:
• Indoor or outdoor installation
• Environmental temperature: -20°C / +50°C
• Relative humidity: max. 95% without condensation
• Non-potentially-explosive atmosphere
• Low-salinity atmosphere, without corrosive chemical agents
1.2 Safety instructions
• Put on appropriate PPE (Personal Protective Equipment) before any work.
• Before installing the ventilation unit, make sure that the bracket and the location are strong enough
to bear the weight of the unit and any accessories.
• Do not open the access panels without having shut off the padlockable switch-disconnector included
in the unit.
• If work has to be carried out on the device, cut off the power supply on the main circuit breaker and
make sure that nobody can accidentally turn it back on.
• Make sure that moving parts are stationary.
• Check that the ventilation motor is not accessible via the connection brackets. (connection sheath
or protective shield).
Before starting, check the following points:
• Make sure that the device does not contain any foreign bodies.
• Check that all the components are mounted in their original positions.
• Check manually that the fans do not rub or get blocked.
• Check the connection of the earth electrode.
• Check that the access hatch is properly closed.
1.3 Reception - Storage
In case of short shipment, non-conformity, and/or total or partial damage to the products delivered, the
Buyer must, in accordance with article 133-3 of the French Commercial Code, add written reservations to
the carrier's delivery slip and confirm them within 72 hours by registered letter with acknowledgement of
receipt with a duplicate for the seller. If the equipment is received without express reservation, the Buyer
has no subsequent recourse against us.
The product must be stored protected from weather, shocks and soiling due to splashing of any kind during
its transport from the supplier to the final customer and on the site before installation.
3/48
NT00000603-JBRB-ECOWATT-PR-AN-191202
Advertisement
Table of Contents
