Electrical Connection Of A Cene Power Meter (Optional Accessory); Commissioning; Description Of Rmec Controller Keys; Calibration Of Built-In Pressure Sensors (Compulsory Step) - ViM JBRB ECOWATT PR Instruction Manual

5.10 Electrical connection of a CENE power meter (optional accessory)

The power meter connection depends on the model. See the manual of the product used.
6.

COMMISSIONING

6.1 Description of RMEC controller keys

Home page
JBRB ECOWATT XX
RMEC VX.X
Confirm to access the main level menu

6.2 Calibration of built-in pressure sensors (COMPULSORY STEP)

When it is powered on, the RMEC controller calibrates its pressure sensors.
Do not skip this calibration (duration: approx. 3 mins) when powering up for the first time as it is
essential for the system to work properly.
Subsequently, in case of powering back on, this calibration can be skipped by pressing confirm
back . If no keys are pressed, the fan starts up automatically after approx. 3 mins.
+
–
Power meter
Function access keys
Escape/retour
Several presses might be required depending on
the menus
24/48 NT00000603-JBRB-ECOWATT-PR-AN-191202
230V
power
supply
PRESSURE SENSORS
PA PB
+ – + –
Défilement/sélection
Ok/Validation
Défilement/sélection
then