Table of Contents
Advertisement
6.3 Access levels
2 access levels are available: a user level and an installer level.
USER level enables:
• checking of the active system operating mode,
• control of the fan's On and Off settings (in the absence of a priority command),
• setting of the date and time,
• checking of the following values:
- Air pressure and volume,
- The % of the fan's max. speed,
- Depending on the sensors wired to the RMEC controller, the level of CO2, temperature, level of hygrometry,
• alarm reporting.
INSTALLER levels enables:
• modification of the operating mode,
• setting of the COP and CAV mode settings,
• configuration of the VAV operating mode:
- definition of the sensors used,
- setting of the desired min. and max. measurement ranges,
- setting of min. and max. air volume settings,
• configuration of the clock function,
• configuration of the power meter,
• access to the state of the RMEC inputs/outputs for diagnostics.
To access installer level, follow the instructions, below.
SYSTEM
CONFIGURATION
ACCESS CODE
:
0000
ACCESS CODE
_ 000
:
ACCESS CODE
:
1,000
ACCESS CODE
: INSTALLER
The value to set flashes
Set each value to 1
Confirm each value to move on to the following value
up to 1111
Access to the INSTALLER main menu
25/48
NT00000603-JBRB-ECOWATT-PR-AN-191202
Advertisement
Table of Contents
