Max Dial Rate; Max Flow Rate; Site Id; Interval - Honeywell Mini-AT User Manual

Item
No. Item Name
————————————————————————————————————————
197

MAX DIAL RATE

198

MAX FLOW RATE

199 DATE (DD-MM-YY)
200

SITE ID

201 SITE ID PART 2
202

INTERVAL

www.honeywell.com
118
Mini-AT User Guide
Description
The highest Instantaneous Dial Rate (item 218) since last manually
reset.
Default = 0.00
The highest Instantaneous Flow Rate (item 209) since last
manually reset.
Default = 0.00
The calender date displayed with the first two digits as 'DAY', the
second two digit as 'MONTH' and the last two digits as 'YEAR'.
Note: A date entered at this item (199), will also appear at item
204. The date format of item 204 is governed by the selection at
item 262.
If the Event Log Lock (item 149) is set to "1", then the Date
Format (item 262) will be set to Code 2, YY-MM-DD. As a result,
item 204 and item 199 will get changed to YY-MM-DD format.
At this point, item 262 may be changed to any of the format
options and will be reflected at item 204, but item 199 cannot be
changed from the YY-MM-DD format
Default = 01-01-98
User assigned, eight digit numeric site number. Limited to
characters: 0-9. The"." and "-" are not valid characters. Note: All
Mini-ATs downloaded using Mercury Instruments Windows-based
software must be configured for unique Site ID Numbers at items
200 and 201.
Default = 00000000
Eight additional digits for the site number, if needed. Note: All
Mini-ATs downloaded using Mercury Instruments Windows-based
software must be configured for unique Site ID Numbers at items
200 and 201.
Default = 00000000
User selected time periods that determines how often a time-stamp
record is placed in audit trail memory
Select: 15 (minutes)
30 (minutes)
60 (minutes)-----Default
24 (hours)
Format: DD-MM-YY