Optn Rep Item 1; Optn Rep Item 2 - Honeywell Mini-AT User Manual

Item
No. Item Name
————————————————————————————————————————
229

OPTN REP ITEM 1

JB24
and re-
230

OPTN REP ITEM 2

231 OPTN REP ITEM 3
232 OPTN REP ITEM 4
233 OPTN REP ITEM 5
234 OPTN REP ITEM 6
235 REPORT TRIGGER 1
236 REPORT TRIGGER 2
237 REPORT TRIGGER 3
238 REPORT TRIGGER 4
239 REPORT TRIGGER 5
240 REPORT TRIGGER 6
241 REPORT TRIGGER 7
242 REPORT TRIGGER 8
Mini-AT User Guide
Description
The last six of ten, user selectable Audit Trail Report Items that can
be placed in Audit Trail memory. The use of these six items is
optional. If any of these six items are other than 255, the
instrument is forced to store the maximum of ten audit items per
record. In this case, up to five 255s can be used to specify a blank
(unused) column. To configure audit trail memory for only four
items per record, place a 255 in all six item codes (229 - 234). If
audit trail memory is configured for four items and then is to be
returned back to the default ten item arrangement, the instrument
must betaken UNCONFIGURED by jumpering pins 3 & 4 of
and cycling the power. This will erase all audit trail data,
map the RAM memory for ten item configuration.
Default:
See above. Default:
Default:
See above.
Default:
See above.
See above. Default:
Default:
See above.
Audit Trail Time Intervals:
Daily Nominated Volume Reached:
Alarm Activations:
Serial Access:
Meter Reader (Mag Wand) Access:
OBSOLETE
OBSOLETE
Changes to item values:
048 (Battery Voltage)
000 (CorVol)
002 (UncVol)
008 (PCor Gas Pressure)
026 (Gas Temperature)
059 (Battery Wake Cycles)
TIME
VOLUME
ALARM
SERIAL
MAG READ
CHANGE
123