Honeywell Mini-AT User Manual page 32

The Scheduled Call-In feature also requires the Mini-AT to issue AT commands to a Messenger
Modem. This feature is designed to interface with third party software applications that can accept a sched-
uled call-in from a remote site.
To use this method, set the following items:
333
334
335
339
486
491
492
494
495
496
Note: After each Scheduled Call-in, the date in item 334 must be changed to reflect the next
desired call-in date. Otherwise the instrument will not call-in again.
The Mini-AT can also be configured to call-in for both the scheduled and alarm case. In order to configure the
instrument for this method the following items must be set:
333
334
335
339
486
491
492
493
494
495
496
www.honeywell.com
32
Mini-AT User Guide
Call-in Trigger
Scheduled Call-in date
Scheduled Call-in time
Scheduled Call-In Phone#
Modem AT Enable
Modem Init String
Modem Dial String
Modem Hang-up String
Modem Retry Interval A
Modem Retry Interval B
Call-In Trigger
Scheduled Call-in date
Scheduled Call-in time
Scheduled Call-In Phone#
Modem AT Enable
Modem Init String
Modem Dial String
Alarm Call-In Phone #
Modem Hang-up String
Modem Retry Interval A
Modem Retry Interval B
2 - Scheduled Call-in only
desired date of call
desired time of call
Phone number to call at scheduled time
1 - Call-in via AT commands
Initialization command of the modem
Default = &F
Command sent to initiate dialing
Default = ATDT
Command sent to modem for hang-up
Default = ATH
Time to wait for a retry if first call fails
Default = 5 (value is in minutes)
Time to wait for a retry if all calls fail
Default = 1440 (value is in minutes)
3 - Alarm & Scheduled Call-in
desired date of call
desired time of call
Phone number to call at scheduled time
1 - Call-in via AT commands
Initialization command of the modem
Default = &F
Command sent to initiate dialing
Default = ATDT
Phone number to call for alarm
Command sent to modem for hang-up
Default = ATH
Time to wait for a retry if first call fails
Default = 5 (value is in minutes)
Time to wait for a retry if all calls fail
Default = 1440 (value is in minutes)