Adjusting The Setpoint Temperature With The Adjustment Dial - Honeywell HR 40 Installation And Operating Instructions Manual

Adjusting the setpoint temperature with the
adjustment dial
The adjustment dial on the operating unit can be used to adjust the setpoint
temperature at any time. The setting will apply until the next programmed
heating or economy period. When the adjustment dial is turned the display
shows the preset setpoint temperature.
The adjustment dial does not have a stop. By turning the ring clockwise, the
following settings are shown:
Display
5...30
11
Setting
Radiator valve closed
Current setpoint temperature
(poss. adjustment range)
Radiator valve fully open