Omron Sysmac NY Series Hardware User Manual page 70

3 Hardware Overview
Item
L ID information label
M License label
Port Assignment Details
This section gives details on the ports of the Base Layer for products with a Machine Controller.
The base layer has ports for Windows and ports for the Machine Controller Software.
A
The connector layout and the available components can differ depending on the product configuration.
Refer to 1-4 Product Configuration on page 1-6 for configuration details.
Item
A Windows Operating System
B Machine Controller Software
Additional Information
The ports for Windows include the SD Memory Card slot and the USB connectors. These are
not accessible for the Machine Controller Software.
3-6
Name
Label containing model-ID, LOT No. and other product specific infor-
mation. Refer to 1-3 ID Information Label on page 1-5 for label de-
tails.
The product key for the operating system.
The product key is inside the cover of the cooling layer for lotnumbers
before 22Z17.
A
B
B
A
A
Name
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
Description
A
A
Description
Ports for the Windows Operating System.
These ports do not give access to the Machine Controller Soft-
ware.
Ethernet ports for the Machine Controller Software.
These ports do not give access to the Windows Operating Sys-
tem.