Omron Sysmac NY Series Hardware User Manual page 217

BIOS - Security
Provides security information like BIOS Password and HDD information.
Security setting adjustments should only be performed by the engineer in charge that
possesses a thorough understanding of the security settings. Selecting non-recom-
mended security settings can put your system at risk.
Changeable BIOS Security parameters and their factory default values:
BIOS Password
BIOS Lock
HDD Security
Configuration
Secure Boot Menu
*1. Only when a storage device is installed. The default password for a storage device is empty.
*2.
®
For Intel Core
For all other CPU types CPU Secure Boot Customization = Custom
*3.
Not applicable for Intel
BIOS - Boot
Provides Boot information and configuration settings.
Changeable BIOS Boot parameters and their factory default values:
Quiet Boot
Setup Prompt Timeout
Bootup NumLock State
Power Loss Control
Enter Setup If No Boot Device
Enable Popup Boot Menu
Boot Priority Selection
UEFI Fast Boot
UEFI Screenshot Capability
New Boot Option Policy
*1. Power Loss Control settings are :
Remain OFF: The IPC Machine Controller will stay OFF when power is supplied to the power connector
Turn ON: The IPC Machine Controller will automatically start up when power is supplied to the power con-
nector.
Last State: The IPC Machine Controller will start up or remain OFF when power is supplied based on the
IPC Machine Controller state at the moment power was removed from the power connector.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
WARNING
Item
Diskname
Secure Boot
®
i7-7820EQ CPU Secure Boot Customization = Standard
® ®
Core i7-7820EQ CPU
Item
*1
Appendices
Default / Remark
Empty
Enabled
Display disk parameters
*1
Enabled
Default / Remark
Disabled
1
On
Remain Off
No
Yes
UEFI Standard
Disabled
Disabled
Place Last
A
A-17