Table of Contents
Advertisement
Available languages
Available languages
30
UK
TECHNICAL SPECIFICATIONS
Operator
Type
Supply voltage
Motor supply voltage
Power absorbed
Max force
Speed
Slow downs
Operating temperature
Degree of protection
Max door height
Max door surface
Operating frequency (%)
Radio receiver
Formula to calculate the
operating frequency
PRELIMINARY WARNINGS
Check that the door structure is in conformity with the regulations in force and that door movement is linear without
friction.
Preliminary checks:
Check that the door structure is sufficiently strong. In any case check that the weight and dimensions of the door fall
Ÿ
within the limits of use of the operator.
Check that the door can be moved manually without force (points of greatest friction) for the entire travel of the
Ÿ
door during both opening and closing.
A garage door is deemed to be well balanced and aligned if it:
Ÿ
requires an equivalent amount of applied force to either manually open or close.
§
requires no more than 150N (15Kg) of applied force to either manually open or close.
§
does not rise or fall more than 100mm when released at any point between fully open and fully closed
§
positions.
does not rub on any supporting or surrounding structures.
§
If the door is not a new installation, check the state of wear of all the components, repair or replace the defective or
Ÿ
worn parts and perform any other operations necessary.
Remove or make non-operating the existing locks.
Ÿ
The wall bracket carries all of the opening and closing thrust of the opener and as such must be securily fastened
Ÿ
to a rigid, structural member of the garage wall or ceiling.
The reliability and safety of the automated device are directy influenced by the status of door structure.
TAIMEN T6
Irreversible electromechanical gearmotor
220/230V 50-60 Hz
MAX 80W
600 N
Adjustable 90-125 mm/s
-20°C + 60°C
IP 20
2,500 mm
10 sqm
30% (at 20°C)
On board, 100 transmitters max
A + C
%Fu =
x 100
A + C + P
TAIMEN
TAIMEN T12
24Vdc
MAX 110W
1200 N
Automatic
-20°C + 60°C
IP 20
2,500 mm
15 sqm
30% (at 20°C)
A = Opening time
C = Closing time
P = Overall pause time
A+C+P = Time between two
openings
Advertisement
Table of Contents
