Supported Sampling Rates For Wav; Protected Setup Page; Video Adjustment Slide-Out Option Bar - AMX NetLinx NXP-TPI/4 Operation/Reference Manual

Firmware Pages and Descriptions
Volume Page Elements (Cont.)
Panel Volume:
Default Panel Sounds:

Supported sampling rates for WAV

The following is a listing of supported sampling rates associated for WAV files played on this G4 unit.
Some WAV files currently played on other devices may not work on this unit. The supported sampling
rates for WAV files are:
Supported WAV Sampling Rates
• 48000 Hz
• 44100 Hz
• 32000 Hz
• 24000 Hz
• 22050 Hz

Protected Setup Page

This button opens the Protected Setup page which centers around the properties used by the panel to
properly communicate with the NetLinx Master. Refer to the Protected Setup Navigation Buttons section
on page 68 for more detailed information.

Video Adjustment Slide-Out Option Bar

Pressing the on-screen Video Adjustment button causes an option bar to slide outwards from the
Navigation buttons (FIG. 45). This option bar provides you with the ability to select/adjust the properties
for the TP4 card connected to the selected slot number and displays the corresponding Adjustment page.
Refer to the following sections for detailed information.
FIG. 45 Video Adjustment Slide-Out Options Bar
The selection of a Slot # allows you to view/alter the properties of a TP4 card connected to the
TPI/4 motherboard on the selected input card slot (Slot ID). The default input slot that is first detected is
SLOT 1. The page displayed depends on the TP4 card being used in the selected Slot ID:
62
This section allows you to adjust the current sound level on the unit's internal
speaker:
• Use the UP/DN buttons to adjust the volume output on the internal speakers
(range = 0 - 100).
• The Internal Sound Level bargraph indicates the current sound level.
• The Mute button mutes the volume.
• The Play Test button plays a test WAV/MP3 file over the internal speakers.
Sets the unit to play either the default Button Hit sound (when you touch an
active button) and/or the default Button Miss sound (when you touch a
non-active button or any area outside of the active button).
• 16000 Hz
• 12000 Hz
• 11025 Hz
• 8000 Hz
NXP-TPI/4 NetLinx Touch Panel Interface