AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 56

Upgrading TPI/4 Firmware
5. Download the appropriate KIT file to your computer.
6. Verify you have downloaded the latest TPI/4 firmware (KIT) file to a known location.
7. Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open the
Send to NetLinx Device dialog (FIG. 35). Verify the TPI/4's System and Device number values
match those values listed within the System folder in the OnLine Tree tab of the Workspace
window.
FIG. 35 Select to NetLinx Device dialog (showing TPI/4 firmware update via IP)
8. Select the TPI/4's KIT file from the Files section (FIG. 35).
9. Enter the Device value associated with the TPI/4 and the System number associated with the Master
(listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.
10. Click the Reboot Device checkbox. This causes the TPI/4 to reboot after the firmware update
process is complete. The reboot of the unit can take up 30 seconds after the firmware process has
finished.
11. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the
dialog (FIG. 35).
12. Click Close (after the unit reboots) to return to the main program.
13. Right-click the associated System number and select Refresh System. This causes a refresh of all
project systems, establishes a new connection to the Master, and populates the System list with
devices on your particular system.
50
Selected Firmware file
Description field for selected KIT file
Firmware download
status
Device value and System number
must match the values
listed in the Workspace window
NXP-TPI/4 NetLinx Touch Panel Interface