AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 49

FIG. 28 G4 Web Control page
7. The Network Interface Select field is read-only for the TPI/4 and uses Wired as the default method
of communication to the web.
8. Press the Web Control Name field to open the Web Name keyboard.
9. From the Web Name keyboard, enter a unique alpha-numeric string to identify the TPI/4. This
information is used by the NetLinx Security Web Server to display on-screen links to the unit.
The on-screen links use the IP Address of the panel and not the name for communication
(FIG. 29).
FIG. 29 Sample relationship between G4 Web Control and Mange WebControl Connections window
10. Press Done after you are finished assigning the alpha-numeric string for the Web Control name.
11. Press the Web Control Password field to open the Web Password keyboard.
12. From the Web Password keyboard, enter a unique alpha-numeric string to be assigned as the G4
Authentication session password associated with VNC web access of this TPI/4.
13. Press Done after you are finished assigning the alpha-numeric string for the Web Control password.
14. Press the Web Control Port field to open the Web Port Number keypad.
15. Within the keypad, enter a unique numeric value to be assigned to the port the VNC Web Server is
running on. The default value is 5900.
NXP-TPI/4 NetLinx Touch Panel Interface
Wired is used when a direct Ethernet connection is being used for communication to the web.
This is the default setting if either no wireless interface card is detected or if both an Ethernet
and wireless card connection is detected by the panel.
The Wireless option is unavailable within TPI/4.
Configuring Communication
43