AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 9

Specifications (Cont.)
Memory:
Supported Audio
Sample Rates:
Certifications:
Touch Drivers:
NXP-TPI/4 NetLinx Touch Panel Interface
• 64 MB SDRAM (upgradeable to 256 MB)
• 64 MB Compact Flash (upgradeable to 1 GB - factory programmed)
• See the Other AMX Equipment: section on page 6 for component upgrade
information.
• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
11025Hz, and 8000Hz.
• FCC (Class A) and CE
Displays the touch driver used by the TPI/4 to interact with the touch device.
The following list shows the series of available touch input drivers that are
selectable by using the TOUCH button on the front panel of the TPI/4:
- AMXDL15A: Selected when using an AMX DL15A touch panel.
- Cirque: Selected when using a Cirque
compatible touch device driver.
- DynaPro: Selected when using either a DynaPro
other compatible DynaPro touch device driver.
- EloTouch: Selected when using either an ELO
compatible ELO touch device driver (default).
- Elo19Touch: Selected when using a 19-inch ELO
compatible ELO touch device driver.
- Eyegonomic: Selected when using either an Eyegonomic
or other compatible Eyegonomic touch device driver.
- EZScreen: Selected when using either an EZScreen
other compatible EZScreen touch device driver.
- EZScreenV6: Selected when using either an EZScreenV6
or other compatible EZScreen touch device driver.
- ISTTouch: Selected when using either an ISTTouch
other compatible IST touch device driver.
- MicroTouch: Selected when using either a MicroTouch
or other compatible MicroTouch device driver.
- MicroTouchMT3000: Selected when using either a MicroTouchMT3000
model touch panel or other compatible MicroTouch device driver.
- MicroTouchPen: Selected when using either a MicroTouchPen
device or other serial SMT3(R)/TouchPen4(+) driver.
- NullTouch: Selected when no touch driver is being used.
Use this option when working with a CRT monitor.
- SanyoTouch: Selected when using either a SanyoTouch
or other compatible SanyoTouch device driver.
- SerialMouse: Selected when using a Microsoft
- SmartTech: Selected when using either a SmartTech
other compatible SmartTech touch device driver.
- SyncMaster173v: Selected when using either a SyncMaster173v
touch panel or other compatible SyncMaster device driver.
- Wacom: Selected when using either a Wacom
compatible Wacom touch device driver.
- Wacom2: Selected when using a Wacom
use of additionally compatible Wacom touch device drivers.
• For updated touch driver information, visit www.amx.com
• Refer to List of Touch Monitors tested with the TPI4 section on page 139 for a
more detailed list of Touch Monitors that have been tested with the TPI4
• Refer to the Step 2: Setting the Touch Drivers section on page 29 for more
information.
Product Information
®
touch panel or other
®
touch panel or
®
touch panel or other
®
touch panel or other
®
touch panel
®
touch panel or
®
touch panel
®
touch panel or
®
touch panel
®
touch
®
touch panel
®
compatible serial mouse.
®
touch panel or
®
®
touch panel or other
®
touch panel which requires the
®
3