AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 51

G4 panels
FIG. 30 Manage WebControl Connections page (populated with compatible panels)
FIG. 31 Web Control VNC installation and Password entry screens
7. Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl
application on your computer. This application contains the necessary Active X and VNC client
applications necessary to properly view and control the unit's pages from your computer.
The G4 Web Control application is sent by the TPI/4 to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if you are connecting to the target panel using a different
computer.
8. In some cases, you might get a Connection Details dialog (FIG. 32) requesting a VNC Server IP
Address. This is the IP Address not the IP of the Master but of the target touch panel. Depending on
which method of communication you are using, it can be found in either the:
NXP-TPI/4 NetLinx Touch Panel Interface
Wired Ethernet - System Connection > IP Settings section within the IP Address field.
If you do not get this field continue to step 9.
Configuring Communication
Compatible
devices field
(showing G4
WebControl links)
Compression
Options
45