AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 12

Product Information
Specifications (Cont.)
Pixel Output and
Refresh Rates per
Resolution:
Pixel Input and Refresh
Rates per Resolution
(via the TP4-RGB card):
Communication/
Programming:
Operating/Storage
Environment:
Included Accessories:
Other AMX Equipment:
6
• 640 x 480 (VGA): 60 Hz, 72 Hz, and 75 Hz
• 800 x 600 (SVGA): 60 Hz, 72 Hz, and 75 Hz
• 1024 x 768 (XGA): 60 Hz, 70 Hz, and 75 Hz
• 1280 x 1024 (SXGA): 60 Hz
• 640 x 480 (VGA): 60 Hz, 72 Hz, 75 Hz, and 85 Hz
• 800 x 600 (SVGA): 60 Hz, 72 Hz, 75 Hz, and 85 Hz
• 1024 x 768 (XGA): 60 Hz, 70 Hz, 75 Hz, and 85 Hz
• 1280 x 1024 (SXGA): 60 Hz, 75 Hz, and 85 Hz
• 1600 x 1200 (UXGA): 60 Hz
The current TP4 RGB card can lock onto other available VESA
resolutions within the range of 640 x 480 thru 1600 x 1200.
The incoming PC screen area can be resized to a max of 1600 by 1200 pixels.
There are two methods of Master communication and programming available:
• DHCP - Refer to the Step 3: Configuring the Ethernet Connection
Type section on page 37.
• ICSNet - Refer to the Master Connection - Using ICSNet section on page 35.
There are two methods of TPI/4 communication and programming available:
• DHCP - Refer to the IP Settings section - Configuring a DHCP Address over
Ethernet section on page 36 for more information.
• Static IP - Refer to the IP Settings section - Configuring a Static IP Address
over Ethernet section on page 36 for more information.
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% to 85% RH Non-Condensing
• Storage Temperature: -20° C (-4° F) to +70° C (158° F)
• Storage Humidity: 0% to 85% RH Non-Condensing
• 2-pin PWR connector (41-5025)
• Assembly Kit (Four-#10-32 screws and Four-#10 washers) (KA0001)
• NXF Bezel with AMX Logo (MA2001-11)
• NXP-TPI/4 Faceplate (MA2001-11)
• NXP-TPI/4 Quick Start Guide (93-2275)
• Rack Ear brackets (Left/Right) for shelf, wall, and under-table mounting
(62-2275-07)
• PSN2.8 Power Supply with 3.5 mm mini-Phoenix connector (FG423-17)
• PSN4.4: Power Supply with 3.5 mm mini-Phoenix connector (FG423-45)
• PSN6.5 Power Supply with 3.5 mm mini-Phoenix connector (FG423-40)
• TP4-RGB Input Cards (with 4 Phillips-head screws) (FG2275-20)
• TP4-VID Input Cards (with 4 Phillips-head screws) (FG2275-10)
• TP4-RGBCBL - RGB Breakout Cable, 15-pin HD female to 5x BNC male
connector (FG2275-30)
• TP4-RGBCBL BNC to RGB adapter cable (FG2275-30)
• Upgrade SDRAM memory:
NXA-EXM128M - 128 MB memory card (FG079-01)
NXA-EXM256M - 256 MB memory card (FG079-01)
• Upgrade Compact Flash (factory programmed with firmware):
NXA-CFTPI128M - 128 MB compact flash card (FG2116-12)
NXA-CFTPI256M - 256 MB compact flash card (FG2116-13)
NXA-CFTPI512M - 512 MB compact flash card (FG2116-14)
NXA-CFTPI1G - 1 GB compact flash card (FG2116-15)
NXP-TPI/4 NetLinx Touch Panel Interface