AMX NetLinx NXP-TPI/4 Operation/Reference Manual page 76

Firmware Pages and Descriptions
Protected Setup Page Elements (Cont.)
Touch Input Driver:
(TPI/4 only)
70
Displays the touch driver used by the TPI/4 to interact with the touch device.
The following list shows the series of available touch input drivers that are
selectable by using the TOUCH button on the front panel of the TPI/4:
- AMXDL15A: Selected when using an AMX DL15A touch panel.
- Cirque: Selected when using a Cirque
compatible touch device driver.
- DynaPro: Selected when using either a DynaPro
other compatible DynaPro touch device driver.
- EloTouch: Selected when using either an ELO
compatible ELO touch device driver (default).
- Elo19Touch: Selected when using a 19-inch ELO
compatible ELO touch device driver.
- Eyegonomic: Selected when using either an Eyegonomic
or other compatible Eyegonomic touch device driver.
- EZScreen: Selected when using either an EZScreen
other compatible EZScreen touch device driver.
- EZScreenV6: Selected when using either an EZScreenV6
or other compatible EZScreen touch device driver.
- ISTTouch: Selected when using either an ISTTouch
other compatible IST touch device driver.
- Magnus: Selected when using either a Magnus touch panel or other
compatible Magnus device driver.
- MicroTouch: Selected when using either a MicroTouch
or other compatible MicroTouch device driver.
- MicroTouchMT3000: Selected when using either a MicroTouchMT3000
model touch panel or other compatible MicroTouch device driver.
- MicroTouchPen: Selected when using either a MicroTouchPen
device or other serial SMT3(R)/TouchPen4(+) driver.
- NullTouch: Selected when no touch driver is being used.
Use this option when working with a CRT monitor.
- SanyoTouch: Selected when using either a SanyoTouch
or other compatible Sanyo
- SerialMouse: Selected when using a Microsoft
- SmartTech: Selected when using either a SmartTech
other compatible SmartTech touch device driver.
- SyncMaster173v: Selected when using either a SyncMaster173v
touch panel or other compatible SyncMaster device driver.
- Wacom: Selected when using either a Wacom
compatible Wacom touch device driver.
- Wacom2: Selected when using a Wacom
use of additionally compatible Wacom touch device drivers.
• For updated touch driver info., visit www.amxs.com
®
touch panel or other
®
touch panel or
®
touch panel or other
®
touch panel or other
®
®
touch panel or
®
®
touch panel or
®
touch panel
®
®
touch device driver.
®
compatible serial mouse.
®
touch panel or
®
touch panel or other
®
touch panel which requires the
NXP-TPI/4 NetLinx Touch Panel Interface
touch panel
touch panel
®
®
touch
touch panel
®