Configure Fxo Port On Gxw410X When Peered With Ucm6Xxx; Figure 4: Configure Inbound Rule On Ucm6Xxx; Figure 5: Configure Fxo Port On Gxw410X: General Settings - Grandstream Networks UCM6 Series Configuring
Hide thumbs
Also See for UCM6 Series:
- Service manual (47 pages) ,
- Manual (31 pages) ,
- Basic configuration manual (29 pages)
Table of Contents
Advertisement
The default destination is configured to IVR. Ensure to select the proper extension for the IVR.
Configure FXO Port On GXW410X When Peered with UCM6XXX
1. Connect the PSTN line to the GXW410X FXO port.
2. On the GXW410X web GUI, go to the Accounts->Account X-> General Settings page and enter
the IP address of the UCM6XXX that you are peering with.
3. Please make sure the SIP Registration option under Accounts-> Account X-> SIP Settings is set
to No. In the following example, UCM6XXX has IP address 192.168.5.250.
Figure 4: Configure Inbound Rule on UCM6XXX
Figure 5: Configure FXO Port on GXW410X: General Settings
Configuring UCM6XXX with GXW410X
P a g e
|
8
Advertisement
Table of Contents
