Register Gxw410X On Ucm6Xxx As An Extension; Create Sip Extension On Ucm6Xxx; Figure 10: Configure Fxo Port On The Gxw410X: Call Progress Tones; Figure 11: Configure Fxo Port On The Gxw410X - Fxo Termination - Grandstream Networks UCM6 Series Configuring

If the PSTN disconnects using the tones method, then turn on "Enable PSTN Disconnect Tone
Detection" and turn off the "Enable Current Disconnect" option.

Figure 10: Configure FXO Port on the GXW410X: Call Progress Tones

For PSTN tone detection, the tone disconnect method is widely used everywhere else in the world. The
North American busy tone value is "f1=480@-32,f2=620@-32,c=500/500" but these tones vary from
country to country. You may look up for the settings for your country at www.3amsystems.com or
download the information from

Figure 11: Configure FXO Port on the GXW410X - FXO Termination

•
Set "Number of Rings" option to 1. If you happen to experience caller ID issue, you may set it to
2. In the sample setup, it's set to 2.
•
Set the "Wait for Dial-Tone" to "No".
•
Set the "Stage Method (1/2)" to 1.

REGISTER GXW410X ON UCM6XXX AS AN EXTENSION

Create SIP Extension on UCM6XXX

To manually create new SIP user, go to UCM6XXX web GUI-> Extension/Trunk ->Extensions. Click on
"Add" and a new dialog window will show for users to fill in the extension information.
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
Configuring UCM6XXX with GXW410X
P a g e | 10