Create Peer Sip Trunk On Ucm6Xxx; Configure Outbound Rule On Ucm6Xxx; Figure 2: Create Peer Sip Trunk On The Ucm6Xxx - Grandstream Networks UCM6 Series Configuring
Hide thumbs
Also See for UCM6 Series:
- Service manual (47 pages) ,
- Manual (31 pages) ,
- Basic configuration manual (29 pages)
Table of Contents
Advertisement
Create Peer SIP TRUNK On UCM6XXX
On the UCM6XXX web GUI, create a peer SIP trunk under Extension/Trunk ->VOIP Trunks. In this example,
the GXW410X IP address is 192.168.5.159.
Figure 2: Create Peer SIP Trunk on the UCM6XXX
Configure Outbound Rule On UCM6XXX
On the UCM6XXX web GUI, go to Extension/Trunk ->Outbound Routes to create a new outbound rule. This
would allow the extension on the UCM6XXX to reach numbers in PSTN network via the peer SIP trunk we just
configured.
P a g e
|
6
Configuring UCM6XXX with GXW410X
Advertisement
Table of Contents
