Installation Sequence For Inverters - Danfoss VACON NXP FI9 Operating Manual

Operating Guide | VACON® NXI Inverters FI9-FI14
A
1
1 Alternative A: Duct
Illustration 10: Free Airflow

5.3 Installation Sequence for Inverters

Context:
Use these instructions to install the inverter.
The inverter can be mounted in a vertical position on the back plane of a cubicle.
Prerequisites:
Make sure that the mounting plane is relatively even.
1. Check the dimensions of the inverter (IP00 module), see
for FI12, or 12.2.4 Dimensions for
2. Make sure that there is sufficiently free space around the AC drive for cooling, see
of the Cabinet. Some free space is also necessary for maintenance.
3. Attach the inverters with the screws and other components in the delivery.
4. Check the dimensions of the control unit (see
Danfoss A/S © 2019.11
B
2
12.2.1 Dimensions for
FI13-FI14.
12.2.5 Dimensions for Control
2 Alternative B: Air barrier
FI9, 12.2.2 Dimensions for
5.2.2 Cooling of FI9 to FI14
Unit), and attach the control unit.
AQ304441431479en-000101 / DPD00909| 33
Mounting the Unit
FI10, 12.2.3 Dimensions
and 5.2.3 Ventilation