Sending Firmware To The Mio Modero Keypads - AMX MIO R-2 Operation/Reference Manual
Device family
Hide thumbs
Also See for MIO R-2:
- Operation/reference manual (24 pages) ,
- Quick start manual (2 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Programming The Mio Modero
Sending Firmware to The Mio Modero Keypads
You need NetLinx studio to update firmware located on the Mio Modero Keypads. To send firmware to
the keypads:
1. Open NetLinx Studio.
2. Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess
Dialog Window .
FIG. 17
Send to Axcess Dialog Window
3. Browse to the location of the firmware file.
4. Select the file within the Files frame.
5. Click Query for Devices.
6. Select the Mio Modero Keypad within the Devices frame.
7. Click Send and then Close.
8. Upon confirmation of a successful send, you can exit NetLinx Studio.
26
Mio Modero Device Family
Advertisement
Table of Contents
