Sending Firmware To The Mio Modero Dms And Dms Pinnacle Keypads; Before Beginning The Upgrade Process - AMX DMS Operation/Reference Manual

Programming The Mio Modero DMS and DMS Pinnacle
List Box Command: My Music with Changes
"'^LDR-1,0,4'"
"'^LDL-1,1,0,5,4'"
"'^LDL-1,1,0,6,5'"
"'^LDL-1,1,0,7,6'"
"'^LDL-1,1,0,8,7'"
"'^LDL-1,1,0,9,8'"
"'^LDL-1,1,0,10,9'"
"'^LVC-2,4'"
"'^LVU-2'"
Track
Number
1
2
3
4
5
6
Modified Data
7
8
9
Sending Firmware to The Mio Modero DMS and DMS
Pinnacle Keypads

Before beginning the Upgrade process

If power or connection fails during a firmware upgrade, the file system may become
corrupted.
A Mio Modero DMS or Mio Modero DMS Pinnacle which is not using a valid username and password
will not communicate with a secured Master. If you are updating the firmware on a keypad which is not
using a username or password field, you must first remove the Master Security feature to establish an
unsecured connection.
52
Artist Album
The Shins Chutes Too Narrow Kissing the Lipless
The Shins Chutes Too Narrow Mine's Not a High Horse 10,2
The Shins Chutes Too Narrow So Says I
The Shins Chutes Too Narrow Saint Simon
The Shins Chutes Too Narrow Fighting in a Sack
The Shins Chutes Too Narrow Pink Bullets
The Shins Chutes Too Narrow Turn a Square
The Shins Chutes Too Narrow Gone for Good
The Shins Chutes Too Narrow Those to Come
Setup and configure your NetLinx Master. Refer to your particular NetLinx Master instruction
manual for detailed setup procedures.
Calibrate and prepare the communication pages on the Mio Modero DMS and Mio Modero
DMS Pinnacle for use. For the Pinnacle, refer to the Device Calibration section on page 20.
Refer to the NetLinx Studio version 2.4 or higher Help file for information on uploading
firmware files via Ethernet.
Displayed Data
Title Channel
10,1
10,3
10,5
10,6
10,7
10,8
10,9
10,10
Mio Modero DMS & Mio Modero DMS Pinnacle
Row has been
removed