Changing Buttons; To Switch Out "Installation" Buttons - AMX MIO R-2 Operation/Reference Manual

Device family

Hide thumbs Also See for MIO R-2:

Table of Contents

Installation

Installation Buttons

FIG. 3

Sections of The Mio Modero

Changing Buttons

The Mio Modero Classic and Elite are shipped with "installation" buttons; they are intended to be place

holders until your engraved buttons, designed with KeypadBuilder, arrive.

1. Pry the button using the slot on the front of the "installation" buttons to remove them from the Mio

Modero.

2. Select the location of the custom buttons and snap them into place. Be sure to note the orientation of

the white insert on the back of the button, the notch must be down. Insert the bottom of the button

first and then push the top into place.

3. Snap the faceplate on the mounting frame.

LCD

Mounting

Frame

Faceplate

Mio Modero Device Family

Table of Contents